Vesa Mounts, General Description - Planar HB Series User Manual

4. VESA Mounts, General Description

VESA mounts are used to secure the Planar HB Series Huddle Board display. The display can
be installed using a variety of VESA mounts available through Planar. If you do not have a
VESA mount, and would like to purchase one, contact Planar.
If you purchased a VESA mount, you should have a received a separate box with mounting
supplies and an installation manual. Follow these instructions carefully.
Caution: Shorter screws will result in insufficient mounting strength and longer screws could
puncture parts inside the display. The device may fall, causing serious personal injury or death.
To prevent injury, this device must be securely attached to the wall in accordance with the
installation instructions supplied with the mount. The mount must be secured to the Planar HB
Series Huddle Board display using the four M8-1.25 VESA mounting locations, and
10mm - 15mm thread engagement is required for secure mounting. Select the correct
screw/spacer combination for the mount.

Prior to installation, make sure you know where all of the mounting points are located.

Follow all safety precautions outlined in the VESA Installation manual.

Verify the parts received with the list shown in the VESA Installation manual.

Refer to the Planar Display Cleaning Guidelines for more information.
Planar HB Series Huddle Board User Manual
020-1392-00A
Introduction
Page | 11