Bissell PROHEAT 2X REVOLUTION 1986 Series Quick Start User Manual page 12

Cleaning Your Carpet
1
3
Press the Power Button
to turn the machine on.
Express Clean Mode:
1. Press the Spray Trigger to apply
solution while making 2 wet passes -
1 forward and 1 back.
2. Release the trigger.
3. Make 2 dry passes - 1 forward, 1
back to suck up the dirty solution.
(Do not hold down the trigger for
this step.)
Recommended Cleaning Pace: 12
inches per second
• Max Clean Mode is intended for your dirtiest carpeted areas. Please note that your
carpets will need an estimated 8 hours to dry. To expedite the drying process, place a
fan in the room or near the carpet.
• In Express Clean Mode, the Dirty Water Tank will not get as full as when cleaning with
Deep or Max Clean Mode.
• It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times
throughout your cleaning process. Room size and the speed at which you clean are both
factors that affect how often the tank may need to be refilled and/or emptied.
10
www.BISSELL.ca
2
Plug into
a properly
grounded
outlet.
Select cleaning mode:
Max Clean - Provides a heavy
cleaning for your dirtiest carpets.
After cleaning, it's estimated the
carpets will need 8 hours to dry.
Deep Clean - Delivers a deep clean
to your carpet.
Express Clean - Provides a lighter
clean with a 30-minute dry time
Recommended Cleaning Pace:
12 inches per second
4
Max Clean &
Deep Clean Modes:
1. Press the Spray Trigger to apply solution
while making 2 slow wet passes - 1 forward and
1 back.
2. Release the trigger.
3. Make 2 slow dry passes - 1 forward and 1
back, to suck up the dirty solution. (Do not
hold down the trigger for this step.)
To recline your
machine for use,
press the Recline
Pedal with your foot.
NOTICE: To prevent
damage to Berber carpets,
avoid repeated strokes in
the same area.