1. Manuals
  2. Brands
  3. Stockmaster Manuals
  4. Lifting Systems
  5. Mezzalift
  6. Assembly instructions manual

Stockmaster Mezzalift Assembly Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CL/INST06
Assembly
Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mezzalift and is the answer not in the manual?

Questions and answers

Related Manuals for Stockmaster Mezzalift

Summary of Contents for Stockmaster Mezzalift

  • Page 1 CL/INST06 Assembly Instructions...

  • Page 2: Mast Assembly

    Mast Assembly IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 On a level surface butt the two Mast sections together. (See illustration No. 1) Step 2 Fix the Large Mast Joining Plate to the two Mast sections using four of the M6 x 16 button head screws - Finger tight only.
  • Page 3 Mast Assembly M6 x 16 Illustration 1 Illustration 2 M6 x 16 Illustration 3 Illustration 4 www.stockmastereurope.nl...
  • Page 4 Mast Assembly Illustration 5 Illustration 6 Illustration 7 Illustration 8 www.stockmastereurope.nl...

  • Page 5: Winch Assembly

    Winch Assembly IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 On a level surface lay the mast face-down as shown. (See illustration No. 1) Step 2 Remove the Nut from the Winch Shaft at A. Pull out the winch shaft and remove the Sproket. Carefully put the Sproket, Shaft, Nut &...
  • Page 6 Winch Assembly M6 x 16 Illustration 3 Illustration 4 M6 x 16 Illustration 5 www.stockmastereurope.nl...

  • Page 7: Mounting Bracket Assembly

    Mounting Bracket Assembly IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Fit the upper Floor Support Angle to the Mast at A & B as shown using two of the M8 x 20 button head screws and nyloc nuts. Screws facing up. Nuts on top. (See illustration No. 1) Note: Upper Floor Support Angle can be fitted upside down on the Mast if required for additional height adjustment.
  • Page 8 Mounting Bracket Assembly M8 x 20 Illustration 3 Illustration 4 M8 x 20 Illustration 5 Illustration 6 www.stockmastereurope.nl...
  • Page 9 Instalation IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Stand the Mezz-a-Lift into position placing the upper Floor Support Angle on the upper landing in the required position. With someone supporting the unit, mark the fixing positions A1 - A3 in the upper landing thru the Fixings not supplied Floor Support Angle.
  • Page 10 Instalation Tighten ALL Fasteners at this point Illustration 3 www.stockmastereurope.nl...

  • Page 11: Chain Setting

    Chain Setting IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Cut and remove the Black Wire Ties at the top of the Mast. Do not cut the Large White Centre Tie (See illustration No. 1) Step 2 Position the Chain around the Sprocket using the Large White Wire Tie.
  • Page 12 Chain Settting Illustration 3 www.stockmastereurope.nl...
  • Page 13 Installing the Winch Cover & Handle IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Place the Winch Cover over the Winch. Fix the top of the cover to the C slots of the Mast using the Self Tapping Screws at A and B.
  • Page 14 Lift Table Assembly IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Leave bolts slightly loose . Fix the Table Brackets to the Mast Carraige with the M10 x 20mm Patchlok bolts. (See illustration No. 1) Note: Table Brackets may be fitted in one of two different mounting positions depending on prefered table height Step 2 Fix the Lift Table to the Table Brackets using the M6 x 25mm bolts and nyloc nuts.
  • Page 15 Safety Barrier Fence Assembly & Installation IMPORTANT To avoid assembly problems follow these instructions exactly. Step 1 Assemble the two Side Safety Barrier fences to the Front Safety Barrier Fence with four M6 x 65 button head screws and nyloc nuts. (See illustration No. 1) Step 2 With the Lift Table wound all the way to the bottom of the Mast, position the Safety Barrier Fence so it clears the Lift Table on all sides.

  • Page 16: Warranty

    Before use see the User Instruction Manual at www.stockmastereurope.nl Use this manual to form part of your Risk Assesment WARRANTY Thank you for choosing Stockmaster. Your safety is in good hands Register your 2 year warranty online at www.stockmastereurope.nl www.stockmastereurope.nl...

Table of Contents