Related Manuals for Aquascale BABY BATH STAND
Summary of Contents for Aquascale BABY BATH STAND
- Page 1 BABY BATH STAND Instructions for assembly and use READ BEFORE USE AND KEEP FOR FUTURE REFERENCE Intended for use with the aqua scale baby bath The aqua scale stand conforms to EN1466:2004+A1:2007...
- Page 3 Welcome Thank you for purchasing this aqua scale baby bath stand. Please read the instructions and safety advice carefully before use, to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact the Helpline on 0161 335 2508.
- Page 4 Parts list Contained in your carton are: Description Pairs of legs (A) & (B) Leg struts (wide A) & (narrow B) Top rail (wide A) & (narrow B) Bath support (wide A) & (narrow B) Bolts (22mm) Plastic washers Nuts Spanner Allen key Bath drainage hose...
- Page 5 Assembling the bath stand Open both sets of legs (1A) and (1B) fully. Place them so that the braces are facing inwards towards one another. braces wider set legs Using the wider strut (2A) for the wider narrower set legs set legs and the narrower strut (2B) for the narrower set legs, join the two sets of legs and secure using eight bolts and...
- Page 6 Assembling the bath stand Using the wider top rail (3A) for the wider set legs and the narrower top rail (3B) for the narrower set legs, push the open ends of the top rails onto the ends of the legs. Top Tip: If you have trouble pushing the top rails onto the ends of the legs, then apply a small amount of washing up...
- Page 7 Folding the bath stand To fold: Unlock both braces (A) by raising them in the centre by approximately an inch. Holding the two top rails, draw them together (B).
- Page 8 Customerservice@kooltrade.co.uk Imported by Kooltrade. M34 3QA www.theaquascale.co.uk Tel: 0161 335 2508...
Need help?
Do you have a question about the BABY BATH STAND and is the answer not in the manual?
Questions and answers