VRI 2NET Communicator Quick Install

Quick Install
Ellipta Propeller Vitals Monitoring
Welcome to your new Propeller sensor attachment. This guide is for the
2NET Communicator (signal bars and house display). For 2NET2 Communicator
(cell tower and house display) instructions, please flip the page over. If you have
any questions or in need of assistance, do not hesitate to call us at 1-800-860-4230.
Unpack the enclosed 2Net Communicator and plug into a power outlet.
1
lights on the Communicator indicate the hub is ready to transmit readings.
2Net Communicator
POWERED BY
TM
by Qualcomm Life
Clip the sensor on top of the inhaler.
2
It is critical that the sensors are
attached to the correct medications.
Ready to recieve readings from your medical device(s)
Receiving readings from your medical device(s)
Sending readings from your medical device(s)
Resetting. If this is continual, please call the
Vitals Monitoring Team at
Take your medication as prescribed
3
with the sensor on. After inhaler use
the lights on your Communicator will
flash indicating your information is
being sent to the Vitals Monitoring
Team.
After the first use please call our
Vitals Monitoring Team at
1-888-875-0976
readings were received.
Reminder: when it's time to refill, remove
the sensor and place on your new inhaler
DO NOT discard the sensor.
Wait until the
1-888-875-0976
to ensure your
®