Connecting To Power - Goodmans GHC31PLL User Manual

This appliance may be fitted with a non-rewirable plug. If you need to change the
fuse in a non- rewirable plug, the fuse cover must be refitted, If the fuse cover is lost
or damaged, the plug must not be used until a replacement is obtained (
available from the appliance manufacturer). It is important that the colour of the
replacement fuse cover matches the colour marking on the base of the plug.
If the plug has to be changed because it is not suitable for your socket, or
becomes damaged, it should be cut off and an appropriate plug fitted following
the wiring instructions. The plug removed must be disposed of safely as insertion
into a mains socket is likely to cause an electrical hazard. For your own safety read
the following instructions carefully before attempting to connect this unit to the
mains.
You should only plug the appliance into a 230V AC, 50Hz supply. Connecting it to
other power sources may damage the appliance.
The wires in this mains lead are coloured in accordance with the following code:
IMPORTANT
The colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be connected to the
terminal marked with the letter L or coloured red.
No connection should be made to the earth
terminal.
If a 13 Amp (Bs1363) plug is used, a 3 Amp fuse must be fitted, or if any other type of
plug is used a 3 Amp fuse must be fitted, either in the plug, adaptor, or on the
distribution board.
To prevent electric shock disconnect from the mains before removing the cover
This symbol means that this unit is double insulated. An earth connection is not required.

4. CONNECTING TO POWER

BLUE = NEUTRAL
BROWN = LIVE
Caution
(Page 4)
BROWN
E
(LIVE)
L
L
BLUE
(NEUTRAL)
N
N
CORD GRIP
22.DEC
FUSE