Two Water Pipe Whips are included with your Launch Box heating works in order Orbiter. Connect the 18” Whip to your vaporizer and use the 27” Whip to draw your vapor. to avoid combusting your trench.
REMOVING THE GLASS ALWAYS REMOVE GLASS FROM BASE WHEN ADDING/REMOVING WATER TO AVOID DAMAGING WOOD Pull back the SLIDE on the Remove the GLASS from BRACE to release tension. the BRACE and BASE.
Page 5
FILLING IT UP ALWAYS REMOVE GLASS FROM BASE WHEN ADDING/REMOVING WATER TO AVOID DAMAGING WOOD Remove GLASS from BRACE and BASE. Add water to the FILL LEVEL. Return GLASS to the BASE and BRACE. With GLASS in the BRACE, return the SLIDE to the top of the BRACE to lock in place.
CLEANING GLASS ALWAYS REMOVE GLASS FROM BASE WHEN ADDING/REMOVING WATER TO AVOID DAMAGING WOOD Remove GLASS from BRACE and BASE and drain the liquid. Add small amount (20-30ml) of Isopropyl Alcohol. Add a generous amount of salt to act as an abrasive. Cover both openings with your fingers and shake vigourously until all residue is removed.
Page 7
CLEANING WHIPS Remove the stem from the end of the whip. Slide the wood portion off of the whip. Soak in hot water for about 5 minutes to loosen buildup inside of the whip. Hold securely from glass end and squeeze residue out of the open end like toothpaste.
For warranty service, fill out our online form at MFLB.IT/CONTACT. You will be asked to provide: your name, address, phone number, the serial number of your Orbiter, a photo of the issue, and description of the issue. For more comprehensive warranty information, please visit:...
Page 9
ORBITER TUTORIAL FOR FURTHER INFORMATION, CHECK OUT OUR VIDEO TUTORIAL AT: MFLB.IT/HOW2ORBIT...
Need help?
Do you have a question about the Orbiter and is the answer not in the manual?
Questions and answers