Download Print this page

Kammok Swiftlet Assembly Instructions page 2

Advertisement

Assembly Instructions
Attach Legs
1
Attach a leg to each side of the arm.
Repeat on the second arm.
How to use the snap buttons...
TIP
ARM
LEG
PRESS THIS
BUTTON
Add Middle Bar
2
Choose the short or long middle bar
to attach to both arms. The setup
process moving forward is the exact
same either way.
LONG BAR: Recommended for sleeping,
lounging, and multiple people at once.
SHORT BAR: Recommended for tight spaces,
indoor use, the office, campfires, and naps.
Clip in Hammock
3
Clip the hammock into the teacup
sliders, ensuring that the hammock
is fully wrapped within the U-shaped
cradles at the ends of each arm.
Adjust to Perfection
4
Adjust the teacup sliders on each arm to
find your perfect hang.
Make sure the pin snaps in a hole. If you
feel the pin sink down you did it right!
Enjoy the hang!
Packing Down the Swiftlet
To pack down, follow the instructions above in reverse. Refer to "What's in the Bag?"
on the other side to see how to pack the parts back into the bag.
ARM
LEG
LONG
SHORT
ARM

Advertisement

loading