Download Print this page

Kammok Swiftlet Assembly Instructions

Advertisement

Quick Links

What's in the Bag?
How to Stuff the Carry Bag
1x Arm
What's Included?
2x Arms
Teacup Slider
1x Long Bar
4x Feet
Our gear is built for life. Activate your lifetime warranty
by registering your product at kammok.com/register.
WARNING
MAXIMUM WEIGHT 400 LB USE HAMMOCK STAND WITH CAUTION. INHERENT RISKS EXIST. Before every use, fully inspect the
hammock and stand for snags, fraying, construction, defects, and general wear and tear. If anything suspicious is found during inspection, discontinue
use immediately and contact the Kammok team with questions. Always make sure to clear the area beneath your hammock. Inspect for objects above
hammock that pose risk of falling (e.g. dead tree limbs.) Under no circumstances should you hang your hammock more than 18 inches off the
ground. Always test the hammock stand to ensure it is setup correctly before putting your full weight into it. Activities other than reclining can result in
injury. Do not permit children to use unattended. Do not jump or swing aggressively in hammock while using your hammock stand. Always follow
provided instructions. Do not modify the stand or hammock in any way; modification may result in failure or injury and will void your lifetime warranty.
1x Arm
1x Long Bar
2x Feet
1x Short Bar
1x Carry Bag
2x Feet
1x Short Bar
Designed in Austin, Texas
Made in China

Advertisement

loading

Summary of Contents for Kammok Swiftlet

  • Page 1 If anything suspicious is found during inspection, discontinue use immediately and contact the Kammok team with questions. Always make sure to clear the area beneath your hammock. Inspect for objects above hammock that pose risk of falling (e.g.
  • Page 2 Enjoy the hang! Packing Down the Swiftlet To pack down, follow the instructions above in reverse. Refer to “What’s in the Bag?” on the other side to see how to pack the parts back into the bag.