Adjusting The Rear Brake - Velocifero MAD TRUCK Manual

CHARPT 5： ADJUSTMENTS

ADJUSTING THE REAR BRAKE

(for equipped with mechanical brakes vehicle:Golf version)
The rear brake is disk type with mechanical control for which requires periodic adjustment interventions.
The clearance on the rear brake lever should be 5 to 6 mm.
The adjustment must be performed as follows:
-In the driving position to verify the clearance
-If the stroke was superior turn register A on the brake lever
Attention: After each adjustment, tighten the locknut.
For the adjustment of the tension of the brake cable to act on the bolt B so that operating the lever on the handlebar
braking is immediate, and that the wheel rotates freely when the lever is not operated.
A
60