Velocifero MAD TRUCK Manual page 60

CHARPT 5： ADJUSTMENTS
(This is for equipped with mechanical brakes vehicle:Golf version；The basic version shall not adjust the brake without authorization.)
The front brake is of the disc type with mechanical control for which requires periodic adjustment interventions.
The clearance on the front brake lever should be 5 to 6 mm.
The adjustment must be performed as follows:
-In the driving position to verify the clearance
-if the stroke was superior turn register A on the brake lever
Attention: After each adjustment, tighten the locknut.
For the adjustment of the tension of the brake cable to act on the bolt B so that operating the lever on the handlebar
braking is immediate, and that the wheel rotates freely when the lever is not operated.
58