SAVE THESE INSTRUCTIONS CAUTION Read the instructions before using the appliance. Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Apart from the notes contained herein the general safety provisions and rules for the prevention of accidents of the legislator must be observed.
The appliance has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of the other cleaning agents or chemicals may adversely affect the safety of the appliance. Pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment containing electrical components, such as the interior of ovens.
Page 4
To ensure applicable safety, use only original spare parts from the manufacturer or approved by the manufacturer. WARNING Hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer CAUTION Several hours of continuous use of the appliance can lead to numbness in the hands in rare cases.
j) Do not mix cells of different manufacture, capacity, size or type within a device. k) Battery usage by children should be supervised. l) Seek medical advice immediately if a cell or a battery has been swallowed. m) Keep cells and batteries clean and dry. n) Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
Switch If the lever on the trigger gun is released the pressure switch turns off the pump, the pressure jet is stopped. If the lever is pulled the pump is turned on again. Symbols on the machine The high pressure jet must not be directed at persons, animals, live electrical equipment or at the appliance itself.
Description of the Appliance Trigger gun 2. Safety lock 3. Adjust switch OFF/ON 4. Battery pack 5. Spray wand 6. 3 in 1 Nozzle 7. Battery charger 8. Suction hose 9. Water inlet 10. Adjust switch pressure Technical specifications Voltage 20V/ Cordless Power 1/5HP...
Page 8
Max. inlet pressure: 100PSI Weight 3.8LBS Assembly Mount loose parts delivered with appliance prior to start-up 1. Installing the battery pack 2. Installing the spray wand • Fit the spray wand into the gun and rotate it until the two parts are completely locked.
Page 9
3. Connect the inlet hose to the water inlet Connect the suction hose adaptor(female coupler) to the water inlet of the pressure cleaner, then thread your suction hose(male end) into the open reservoirs . Start up If the appliance does not operation within 1 minute, disconnect the main then check it according to the instructions in Chapter “Troubleshooting”.
Impurities in the water can damage the pressure pump and the accessories. Water supply from mains, or drawing in water from the open reservoirs Insert the suction hose connection into the appliance in place of the fine filter. Put the suction hose with the integrated filter into the water source. This pressure cleaner is suited to work with the YILI suction hose to draw in surface water, e.g.
Page 11
• If want to adjust the pressure, you can touch the switch. Release the switch of the trigger gun; the appliance will switch off again and stop the water jet. Operation with detergent (optional) Detergent can only be added when the appliance is operated in low pressure mode. When using detergents, the material data safety sheet issued by the detergent manufacturer must be adhered, especially the instructions regarding personal protective equipment.
• When finished using the pressure cleaner, you must remove the detergent bottle from the trigger gun, then drain residual the detergent and rinse the detergent tanks with clean water. • Factory of the pressure cleaner is not responsible for the damage caused by detergent or any chemical agent.
Care and maintenance Turn the appliance off and disconnect from the battery pack after operation Clean the valve opener and fine filter Valve opener and filter must not be damaged. Remove the valve opener and fine filter using the suction hose connection. Clean the valve opener and fine filter under running water.
Troubleshooting Turn off the appliance and remove the main plug prior to performing any care and maintenance work. Repair work and work on the electrical components may not only be performed by an authorized customer service. You can rectify minor faults yourself with the help of the following overview. If in doubt, please consult the authorized customer service.
Accessories Only use original accessories and spare parts, they ensure the safe and trouble-free operation of the appliance. For information about accessories and spare parts, please visit YILI web. Warranty 1. This product has been manufactured to a high quality standard. The warranty period is 3 months from date of purchasing.
Need help?
Do you have a question about the 8885725 and is the answer not in the manual?
Questions and answers