Safety Tips - Oster OS-GSG20SLI Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

If possible, install the gas cylinder outside the kitchen in a
protected place that has good airflow.
Use a 1/2 –inch copper pipe to connect to the gas stove.
Plastic hoses should never connect to the back of the gas stove.
HOSE INSTALLATION:
Place the metal clamp on the hose end.
Connect the hose to the oven receptacle and tighten the clamp.
Place the other clamp on the opposite hose end and connect it to the pressure
regulator. Tighten the clamp.
Bolt the pressure regulator to the gas cylinder carefully.
After the installation, check for gas leaks, using soap or liquid detergent.
Adaptor
FOR CHILDREN:
Avoid accidents. After unpacking the stove, properly discard all
packing materials and keep them away from children.
Do not allow children to handle the appliance or touch the stove
surface, even when it is disconnected.
Do not leave children alone or unattended when the stove is in
use, is still hot, or shortly after it is turned off.
The stove handle, door and exterior may become hot when the
grill is in use. Keep children away.
FOR THE CONSUMER AND INSTALLER:
Do not install your gas stove on top of the power cord.
Disconnect the stove before cleaning or doing maintenance.
Never unplug the stove by pulling on the power cord. Use the plug. Do not
manipulate your gas-stove plug. Do not bite, twist or tie the power cord.
It is dangerous to modify your gas stove's specifications or characteristics.
Connect the stove directly to its outlet. Do not use an extension cord or
adaptor plug.
S A F ET Y TIP S
En g lish -5
Metalic Flexible Hose

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents