Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ANALOX Ax60K
Summary of Contents for ANALOX Ax60K
- Page 1 Ax60K Carbon Dioxide Detector Quick Start Guide - Kiosk Option Analox Limited 15 Ellerbeck Court, Stokesley Business Park, North Yorkshire, TS9 5PT, UK T: +44 (0)1642 711400 F: +44 (0)1642 713900 W: www.analox.net E: info@analox.net...
- Page 2 THE CO SENSOR AND ALARM. IDENTIFY POTENTIAL SOURCES OF LEAKS AND AREAS OF HUMAN OCCUPATION. DO NOT USE A SINGLE Ax60K TO COVER MORE THAN 80M . USE AN ADDITIONAL UNIT IF THE AREA HAS A COMPLEX SHAPE, PHYSICAL OBSTACLES, POOR VENTILATION OR ANY ZONES WHERE CO MAY COLLECT.
- Page 3 Quick Start Guide - Kiosk Option Introduction This Quick Start Guide explains how to install and use the Ax60K. For more information on operation and maintenance, refer to the Ax60 User Manual P0159-800. For more information on servicing and calibration, refer to the Ax60 Service Manual P0159-803.
- Page 4 Ax60K Carbon Dioxide Detector Quick Start Guide - Kiosk Option Package contents The standard Ax60K package contents are listed below. Additional CO Alarms may be purchased to enable the system to be extended (up to a maximum of four CO Alarms).
- Page 5 Accept/Test, continuously for 5 seconds ½ second on, ½ second off = 3% CO when the Ax60K powers up, once per second to Sounder show a fault, and in parallel with the alarms. The sounder is a high-volume, audible alarm.
- Page 6 Ax60K Carbon Dioxide Detector Quick Start Guide - Kiosk Option Installation Sensor Retain the clear protective film on the fascia until the installation is complete. Using the supplied paper template mark out the wall- fixing position for the CO Sensor ensuring it is level.
- Page 7 Alarm indication: safe level off. Strobe light is off. Sounder is off. Alarms WARNING: IF THE Ax60K DISPLAYS AN ALARM, YOU MUST FOLLOW THE SAFETY PROCEDURES SPECIFIED BY THE HAZARD WARNING AND INFORMATION LABELS. Alarms are indicated as follows: TWA alarm Power indicator flashes once per second.
- Page 8 Quick Start Guide - Kiosk Option Maintenance Alarm test An alarm test can be performed to ensure the Ax60K is operating. Use this procedure: Press and hold down the Accept/Test button for 5–10 seconds. The Ax60K runs a 5-second alarm test, during which: –...
Need help?
Do you have a question about the Ax60K and is the answer not in the manual?
Questions and answers