Using The Montego Ddl; Playing Digital Music With Windows Media Player; Listening To Digital Music; Using The Equalizer - Turtle Beach Montego DDL User Manual

U M
SING THE
P
LAYING DIGITAL MUSIC WITH
Once you've confirmed that the speakers are operating properly, launch Windows Media Player and play
some music files from your digital song library. If you don't hear any sound even though Media Player
indicates the song is playing:

Check that Media Player's volume control is turned up.

In Windows 2000/XP, Check that Media Player is configured to play from the Montego DDL by
clicking Tools on the Windows Media Player menu. Then select Options  Devices  Speakers 
Properties. The selection under ―Audio device to use" should be set to DirectSound: Turtle Beach
Montego DDL Device. If it isn't, then select this option, then press Apply  OK at the bottom of the
window. Close the options window and try Media Player again to see if it corrects the problem.
Set the Master Volume on the Speakers Tab to a comfortable level. If it seems like the volume is too low,
click the Montego DDL Control Panel Mixer Tab and adjust the Wave volume in the Playback Mixer.
L D
ISTENING TO IGITAL
Here are some interesting ways to enjoy your digital music library. To begin, launch Windows Media Player
and play one of your favorite songs from your digital song library. From the Speakers Tab, select a Speaker
Configuration to match the speakers or headphones you've set up with the Montego DDL, then adjust the
Master Volume and Wave volume (in 2000/XP, you can use the Mixer Tab) to a comfortable listening
level. Now try the following:
U E
SING THE
Click on the Equalizer Tab, click the Enable EQ button, then click the Equalizer Presets to hear the
effect of each one. When you're done, click the Flat setting or Enable EQ to restore an unaltered tone.
U E
SING NVIRONMENT
Click the Effects Tab. Make sure the Speaker Position and all three Sound FX settings
are not enabled, so these will have no effect. Click on the Environments Enable, then
click on the pull-down menu and select Living Room from the list. Click the Large,
Medium and Small Environment Size buttons to hear how it changes the intensity of the
effect. Try some other environment settings from the pull-down menu to hear how they
sound.
C S
HANGING
In the Effects Tab, disable Environments and Enable the Speaker Position section.
Click one of the Rotate buttons and change the speed slider from slow to fast to hear the
effect of sound spinning around. Click Random to hear the sound moving in random
positions. The speed control works on this effect as well. Now, click Manual, then click Reset to return the
blue speaker icons to their normal position. Now, click on one of
the blue speaker icons and drag it to a different position to note
how it sounds.
You can also move the speaker positions when using multi-channel
speaker configurations.
When you're done, click the Enable button to disable the Speaker
Position effect.
14
DDL
ONTEGO
W
INDOWS
M
USIC
QUALIZER
E
FFECTS
P
PEAKER OSITIONS
M P
EDIA LAYER
User's Guide