Optional Operation - LG LT-H548DLE1 Installation Manual

Installer Setting -PQRCUSA0
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
How to enter installer setting mode
1
j Some contents may not be displayed depending on the product function
j Installer setting Code table
No. Function Code
1 Test Run 01
2 Address Setting 02
3 E.S.P. Value 03
4 Thermistor 04
5 Ceiling Height 05
6 Static Pressure 06
7 Group Setting 07
8 Override Setting 08
9 Dry Contact 09
Value
01:Set
00~FF : Address
Valu1'01:VeryLow/
02:Low/03:Med/
04:High/05:Very
HighValue2' 0~255
01:Remo, 02:Indoor,
03:2TH
01: Low/02:Standard
03:High/04:Super high
01:V-H/02:F-H/
03:V-L/04:F-L
00:Slave/01:Master
00:Slave/01:Master
00:Manual/01:Auto
1. Press the
enter the installer setting mode. (When you
enter the setting mode initially, Function
code is displayed on the bottom of the
LCD screen.)
Function Code
2. Repeat pressing the Function setting button,
the menu will change with the corresponding
function code
• Test Run ' Address Setting' E.S.P. Value '
Thermistor' Ceiling Height ' Static Pressure '
Group Setting ' Override Setting ' Dry
Contact' Release 3Min. Delay ' Zone State'
Convert Temp. ' Plasma ' Heater '
Humidifier ' Elevation Grill ' Ventilation Kit
No. Function Code
10 Release 3 Min. 10
Delay
11 Zone State 11
12 Convert Temp. 12
13 Plasma 20
14 Heater 21
15 Humidifier 22
16 Elevation Grill 23
17 Ventilation Kit 24
button for 4 secsonds to
01:01
Value
Value
01:Set
01:Variable/02:Fixed
01:Celsius
02: Fahrenheit
00: Not Installed/
01: Installed
Installation Manual 23
Installation