The Things Network Configuration - Seeed SenseCAP Adaption Manual

【Technical Document】

4. The Things Network Configuration

When choose different LoRa network servers, the configuration might be different. For some network servers, the
gateway can be configured from web service (its LoRa APP server). While for some other network serves, it's
required to be configured at the gateway (e.g. via SSH command line). Generally, we need to configure the gateway's
channels (frequencies). While device registration varies with LoRa network servers, one thing in common is that
that all of them provide interface to register devices of OTAA.
There are various plans and regulations for LoRaWAN frequencies in different regions. SenseCAP Sensor Nodes
comply with The Things Network Frequency Plans. To speed up the connection, we reduced SenseCAP Sensor Nodes'
channels in US902-908 and CN470-510.
Here we will use LPS8 LoRaWAN, which is fully adapted to LoRaWAN protocol. Please see its basic architecture below.
You can get more info about this gateway here:
https://www.seeedstudio.com/LPS8-Indoor-LoRaWAN-Gateway-Included-SX1308-LoRa-Concentrator-p-4251.html
7 / 38
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc