Advertisement
An Extension Tube Assembly (7160-0856) can be added to the overhead guard or
overhead bar to move the location of the pillar mount assembly to the front or
side of the fork truck as required. This assembly attaches to the overhead guard
with 3/8 hardware that are provided with the mount.
7160-0856
NOTE: Position the 3/8
mounting bolts as close
to the overhead guard
as possible to prevent
slipping and bowing the
components
NOTE: the orientation of the
bends on back plate
Views of pillar mount mounted
on an Vertical Extension tube
to position the computer
equipment on the side of
the fork truck
Advertisement
