Advertisement
INSTALLATION INSTRUCTIONS
Product
SEE BELOW
EXTENSIONS BARS
Item No. 7160-0363
Item No. 7160-0856
An Extension Tube Assembly (7160-0363) can be added to a pillar to move the
location of the pillar mount assembly to the front or side of the fork truck as
required. This assembly attaches to the pillar with 3/8 hardware that are provided
with the mount.
Views of pillar mount 7160-0364 mounted on
an Extension tube to position the computer
equipment in front of the fork truck
Revision
Fork Lift Horizontal Extension
Fork Lift Vertical Extension
7160-0856
NOTE: Orientation of bends
on backer plate
Form
INST-735
Rev.A
Printing Spec: PS-001
NOTE: Position the 3/8
mounting bolts as close
to the pillar as possible
to prevent slipping and
bowing the components
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Gamber Johnson 7160-0363
- Page 1 Item No. 7160-0856 Fork Lift Vertical Extension An Extension Tube Assembly (7160-0363) can be added to a pillar to move the location of the pillar mount assembly to the front or side of the fork truck as required. This assembly attaches to the pillar with 3/8 hardware that are provided with the mount.
- Page 2 An Extension Tube Assembly (7160-0856) can be added to the overhead guard or overhead bar to move the location of the pillar mount assembly to the front or side of the fork truck as required. This assembly attaches to the overhead guard with 3/8 hardware that are provided with the mount.
Need help?
Do you have a question about the 7160-0363 and is the answer not in the manual?
Questions and answers