Download Print this page

Vapotherm Q50 Quick Reference Manual

Hide thumbs Also See for Q50:

Q U I C K R E F E R E N C E G U I D E

Water Bottle

Reservoir

This guide provides you with basic instructions on how to set up

and operate the Vapotherm Q50 Compressor. The Vapotherm Q50

Compressor should only be used with the Vapotherm Precision Flow

Do no block or restrict the air exhaust underneath the compressor. This

could result in failure to deliver therapy as intended. When the unit is

placed on the floor, be sure that any flooring, such as carpet, does not

restrict the air exhaust. Do not remove the compressor feet.

Hour Meter

Q50

DISS Air

Fitting

Air Intake

Filter

Serial

Number

Label

Power Inlet

Switch and

Fuse Drawer

Table of Contents

Need help?

Do you have a question about the Q50 and is the answer not in the manual?

Page 1 Reservoir Fuse Drawer This guide provides you with basic instructions on how to set up and operate the Vapotherm Q50 Compressor. The Vapotherm Q50 Compressor should only be used with the Vapotherm Precision Flow ® Do no block or restrict the air exhaust underneath the compressor. This could result in failure to deliver therapy as intended.
Page 2 Maximum Precision Flow Rate (L/min) 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 Level 50% or Greater...
Page 3 HIGH ALTITUDE CONSIDERATIONS • The specifications provided in the Instructions for Use are for sea level conditions, unless otherwise noted. • The density of air is lower at higher altitudes and has an impact on the flow capacity of the compressor. •...
Page 4 Precision Flow, and the source is pressurized. The Q50 water bottle and the Precision Flow water traps are empty. The Q50 air intake on the back of the unit and the exhaust on the bottom of the unit are unobstructed.