Listening To A Usb Mass Storage Device; Usb Playback; To Resume Playback After Stopping (Resume Play); Deleting Tracks, Directory Or Format - Sharp RP-20 Operation Manual

Listening to a USB mass storage device

Notes:
This product is not compatible with MTP and AAC file
systems from USB mass storage device.

■ USB playback

1
Press the FUNCTION button repeatedly to select USB
function.
2
Insert a USB memory device into the USB terminal.
3
Press the
4
Press the
of the next track.
5
Press the
ginning of the previous track.
6
To pause playback, press
7
To stop playback, press
To fast forward :
Press and hold
resume playback.
To fast reverse :
Press and hold
resume playback.
Notes:
● If USB memory device is not connected, "NO USB" will
USB
be shown on the display.
● Fast forward/reverse is invalid when playing back a
variable bitrate file.
■ To resume playback after stopping
(resume play)
1
During USB playback, press the
once.
2
To resume play, press the
sumes from the beginning of the current track.
To cancel the resume playback:
Within 1 second, press the

■ Deleting tracks, directory or format

1
During stop mode, press
select the track or directory to be deleted.
USB
2
Press and hold
3
Press
DEL ONE, DEL DIR, DEL ALL or FORMAT.
4
Press
Notes:
● This unit only supports "MPEG-1 Audio Layer-3"
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps.
● Files without MP3 format cannot be played back.
● Playlists are not supported by this unit.
● Total number of folders read is 999 including folder
with non-playable file. However, the display shows
only folder with MP3 files.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
E-10
button to start playback.
button once to go to the beginning
button once to go back to the be-
button again.
/CLEAR button.
button. Release the button to
button. Release the button to
button. Playback re-
/CLEAR button twice.
or
/CLEAR button.
or button repeatedly to select
/CLEAR button twice.
/CLEAR button
button to