Related Manuals for logika Smart Door Guardian
Summary of Contents for logika Smart Door Guardian
- Page 1 Smart Door Guardian WL-ZSPDBMA-PI13-01 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Packing List
Packing List... -
Page 4: Device Layout
Device Layout Infrared Night Vision Photosensitive Detection HD Camera PIR Motion Detection Door Peephole Microphone Doorbell Button Speaker Peephole Cover Battery Cover Release Switch Speaker Status Indicator TF Card Slot WIFI Settings Button Power Switch Charging Indicator Micro USB Charging Port... -
Page 5: Specifications
Features • Communication Mode: IEEE 802.15.4 Zigbee. A hybrid of traditional door peephole and smart camera. • • The doorbell sends alerts to the mobile app, allowing remote access. Smart camera:120° wide angle HD video; Supports remote access and video calling or voice •... -
Page 6: Installation Steps
Installation Steps Hardware Installation Fixed Plate Front Plate Data Line Back Plate M3*8 Battery Door M3*35 (Select different screws based on the actual door thickness) 1) Remove the film from the 3M double-sided tape on the front plate, pass the cylinder through the hole in the door, along with the data cable, and affix to the door. - Page 7 Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
-
Page 8: Device Functions
Device Functions Perform a Factory Reset Press and hold the WIFI Settings button (You will need a paperclip or other small pin to poke through the hole to the switch inside). Wait for the vocal response “Factory setting restored” from the device, then release the button. -
Page 9: Troubleshooting
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!