Table of Contents
Advertisement
Quick Links
JJC
Wireless AC Flash Trigger
JF-220U
Thank you for purchasing the JJC Wireless AC Flash Trigger. For the best performance,
please read the instruction carefully before using. You must read it throughly and fully
understand this manual to avoid improper operation lead to damage of the product.
JJC Wireless AC Flash Trigger is the professional choice for reliable wireless flash
triggering. It works at a universal 433MHz wireless signal with 16 channels available to
free of interference.The fastest sync speed is 1/250 sec.It can trigger the flash at a
distance up to 30m. What's more, the receiver can work under a voltage from 80V to 240V,
makes it a universal wireless trigger. Three components are included in this trigger unit, a
Transmitter, a receiver and a 6.35mm to 3.5mm receiver adapter plug.The transmitter is to
be attached on the hot shoe of the camera while the receiver is to be plugged into the
studio flash. With the wireless flash trigger, you can place the studio flash at different
angles and distances from the object.
Advertisement
Table of Contents
Related Manuals for JJC JF-220U
Summary of Contents for JJC JF-220U
- Page 1 Wireless AC Flash Trigger JF-220U Thank you for purchasing the JJC Wireless AC Flash Trigger. For the best performance, please read the instruction carefully before using. You must read it throughly and fully understand this manual to avoid improper operation lead to damage of the product.
- Page 2 Transmitter 1 Test Button 2 Indicator light 3 Trigger point 4 Battery cover 5 Sync socket Receiver 1 AC input Jack 2 Power indicator light 3 Trigger signal indicator 4 AC output pin 5 Trigger signal output pin...
- Page 3 Power input of receiver: AC 80-240V 50-60Hz Plug size of receiver : IEC straight female connector × 1 IEC straight male connector ×1 6.35mm plug of receiver × 1 Adapter size for receiver plug: 6.35mm to 3.5mm Compatible with: JJC JF-U1/JF-U2 Transmitter...
- Page 4 Dimension Transmitter: 62.9mm×39.2mm×28.8mm Receiver: 74.5mm×48.0mm×31.3mm Channel setting JF-220U transmitter channel selector is inside the battery hatch while the receiver is on the surface. Follow the OPEN direction icon of transmitter to slide out the battery door and set the channel.
- Page 5 How To Use the Wireless AC Flash Trigger ： Set the Transmitter and Receiver to the same channel. Transmitter Receiver Connect the (4) AC output pin to the socket of digital monolight, then insert the power cable into the (1) AC input Jack of receiver. Insert the (5) trigger signal output pin into the control socket of the digital monolight.
- Page 6 About trademark ● JJC is a trademark of JJC Company ONE YEAR UNCONDITIONAL GUARANTEE If for any reason, this JJC product fails within ONE YEAR of the date of purchase, return this product to your JJC dealer or contact service@jjc.cc and it will be exchanged for you at no charge( not include shipping cost).
Need help?
Do you have a question about the JF-220U and is the answer not in the manual?
Questions and answers