Zotac Basic Series Quick Start Manual page 3

Package contents
• 1 x ZOTAC ZBOX
• 1 x Stand
• 1 x AC Adapter
• 1 x Power Cord
• 1 x WiFi Antenna
• 1 x Support DVD
• 1 x User Manual & Warranty Card
Customizing your ZOTAC ZBOX
1. Lay the ZOTAC ZBOX on a flat surface with
the rubber feet facing upwards.
2. Locate the two thumb screws and remove.
3. Slide the cover off the ZOTAC ZBOX in the
direction of the arrow.
Installing memory modules
1. Locate the SO-DIMM memory slots and insert a
SO-DIMM memory module into the slot at a 45
degree angle.
2. Gently press down on the memory module until it
locks into place by the arms of the memory slot.
Installing a hard disk
1. Locate the hard disk bracket and remove the
thumb screw.
2. Lift up on the plastic flap.
3. Insert a 2.5-inch SATA hard disk into the
bracket at a 45 degree angle and gently slide
into the connector.
4. Lower the plastic flap and reinstall thumb
screw.
2
1
2
1
1
3
3
2
2
4