Assembly Instructions - REVELL R-6P-HL Owner's Manual

B. Understanding The Difference Between The Top And Bottom Of The Wall Panels
The top of the wall panels will have heat emitter power cords and control panels coming from
them. The control panels will be at the top of the side wall panels. Also, the power outlets will be
at the bottom of the REAR WALL PANEL. (see Figure 5)
Power Outlets

Assembly Instructions

A. Choose a good location to install the sauna
1. The location must be dry, leveled, and away from any source of water
2. MAIN POWER cord must be easily accessible
3. Two adults are required for installation
4. Wood cabin installation order: Floor Panel
Panel
Bench Heater Panel
5. Tools Required: Philips Screwdriver and Ladder
Figure 5
Lower Bench Heater Panel
Center Bench Guides
Benches (small)
Control Panels
Rear Wall Panel
Wood Brace (fixed frame)
Benches (large) Bench Supports
Front Wall Panel Roof
8
Left Side Panel Right Side
Middle Level
Roof Cover