Table of Contents
Advertisement
Quick Links
Operating and
Operating and
maintenance instructions
maintenance instructions
WAREMA slat roof
WAREMA slat roof
Lamaxa L60/L70
Lamaxa L60/L70
Valid from 22 March 2019
Valid from 22 March 2019
Document number 2029839 [Rev. 3 - en]
Document number 2029839 [Rev. 3 - en]
Original instructions
Original instructions
To be handed over to the opera-
To be handed over to the opera-
tor.
tor.
Please keep for future use.
Please keep for future use.
Advertisement
Table of Contents
Related Manuals for WAREMA Lamaxa L60
Summary of Contents for WAREMA Lamaxa L60
- Page 1 Operating and Operating and maintenance instructions maintenance instructions WAREMA slat roof WAREMA slat roof Lamaxa L60/L70 Lamaxa L60/L70 Original instructions Original instructions To be handed over to the opera- To be handed over to the opera- tor. tor. Please keep for future use.
-
Page 2: Table Of Contents
Table of contents Table of contents Introduction........................3 Information on safety............................ 3 Information on the target group and application of these instructions............3 Explanation of the signal words........................3 Basic safety instructions..........................3 Product information......................5 Intended use..............................5 Parts description............................6 Electrical data............................... -
Page 3: Introduction
They Incorrect operation can result in personal injury. The describe how to operate products with WAREMA standard movements of the product can lead to crushing of the limbs. drives. Other drives and special solutions are not dealt with. - Page 4 Introduction Operation in the event of a power supply failure Access to the radiant heater (if present) An electrically-operated product cannot be operated without The radiant heater is not intended for children. Children are power. A lowered/extended product may be subjected to unable to recognize the danger associated with the product.
-
Page 5: Product Information
Depending on the location, it to become detached from the wall and are therefore leaves and other foreign objects can cause the product to not permitted. WAREMA will not be liable for any ensuing malfunction. damage. Remove leaves and other foreign objects from the... -
Page 6: Parts Description
Product information Parts description Data for LED strips (if present) Parameter Value Output voltage 24 V Degree of protection IP 65 Max. power 4.5 W/m Data for WMS Dimmer smart (if present) Parameter WMS Dimmer smart Operating voltage [V AC] 200-240 Frequency [Hz] 50-60 Load current [A] at 230 V AC... -
Page 7: Wind Resistance Slat Roof
Up to 4500 Up to 5000 In winds over 13.4 m/s, the slats must be closed. With the Up to 5500 slats closed, the WAREMA slat roof is designed for a wind Up to 6000 load of 1.1 kN/m². Tab. 3: Wind speed limits for integrated awnings with easyZIP guidance (details in m/s) -
Page 8: Operation
Operation Operation INFO Only operate the product if it is in technically perfect condition. Do not operate a product if it is damaged. Always contact the specialist dealer and protect the product against being operated as agreed with the specialist. The product can be equipped with additional functions, such as radiant heaters or light rails. - Page 9 Operation Slat roof L60 INFO Select the right channel for the product on the hand-held transmitter. The exact description of the hand-held transmitter can be found in the accompanying instructions for the hand-held transmitter. Turn the slats step-wise into the selected direc- Press the DOWN button briefly.
- Page 10 Operation Slat roof L70 INFO The tilting process in slat roof L70 is executed after the product is fully extended (lower limit position). The motors interlock mutually, which prevents product damage from occurring. As soon as the slats are fully extended, the slats can be tilted or are tilted automatically.
-
Page 11: Operating The Integrated Awning With Easyzip Guidance With Wms Hand-Held Transmitter (If Present)
Operation Operating the integrated awning with easyZIP guidance with WMS Hand-held transmitter (if present) CAUTION Risk of crushing from failure to exercise care during operation. Persons who are located within the projection area may be injured. Keep the projection area clear of persons. Keep children away from the operating elements. -
Page 12: Operating The Led Strip With The Wms Hand-Held Transmitter
Operation Operating the LED strip with the WMS Hand-held transmitter INFO Select the right channel for the product on the hand- held transmitter. The exact description of the hand-held transmitter can be found in the accompanying instructions for the hand-held transmitter. Press the UP button briefly. -
Page 13: Incorrect Operation
Operation Incorrect operation Operation during a storm Slat roof: Accessibility of the operating elements Never let children play with the operating elements of The product must be closed the product, such as the hand-held transmitter or switch. by hand before a bad Keep the hand-held transmitter out of reach of children. - Page 14 Operation Operation in wet weather Cleaning the drainage INFO Slat roof: If the drainage gutter is installed without an inclination, it must be inspected and cleaned more Close the slats of the product in rain. frequently. Drainage gutters may clog with leaves, moss and dirt.
-
Page 15: Service
Service Service These factors reduce the value and may impair the proper functioning of the sun shading product. Proper and regular cleaning and maintenance and the To enhance the durability of the sun shading product, its use of original spare parts only are essential for fault-free surfaces should be cleaned regularly or at least once a operation and a long service life. - Page 16 Keep water away from all live components. you have any questions. Tip/Recommendation Aids required for cleaning: Using the WAREMA cleaning glove together with Whisk broom (soft bristles) WAREMA cleaning agent concentrate for sun Vacuum cleaner (optional) shading products is an ideal way to properly clean Bucket product surfaces.
- Page 17 Prepare a bucket with water Open and close the slats to and WAREMA cleaning agent allow the water to drip off. for sun shading products. Note the dosing quantities specified by the cleaning agent manufacturer.
-
Page 18: Maintenance
To maintain the warranty, maintenance must be heater with bare hands. performed by a qualified specialist in accordance with the WAREMA maintenance checklist. Remove dust from the surfaces using a soft brush or a The maintenance checklist is available from feather duster. -
Page 19: Spare Parts/Repairs
INFO To ensure that your product will operate properly on a continuous basis and to avoid changing its approved status, use original spare parts only. Contact your WAREMA specialist dealer if necessary. 4.4.1 Replacing the heating element De-energise the radiant heater before performing any work on it. -
Page 20: Warranty
Service Disconnecting the line Screws Line Heating element Fig. 4: Replacing the heating element Push the clamps [1] on the left and right outward simultaneously until the heating element is free. Pull the heating element [2] forward and pull the lines [3] Screws Lines out of the housing. -
Page 21: Dismantling
Have the units dismantled by a qualified specialist. Dismantling of the product must be undertaken by a qualified specialist. Ask WAREMA for any missing documents before commencing maintenance. WARNING Electric shock! When working in the immediate vicinity of potentially live parts, such as electrical lines, contact may result in an electric shock. -
Page 22: Troubleshooting
Troubleshooting Troubleshooting INFO Problems described here without a reference to a qualified specialist or certified electrician may be rectified independently. All other problems described here are only to be dealt with by a qualified specialist or certified electrician. Fault: The motor is not functioning Cause Remedy Note... -
Page 23: Ec Declaration Of Conformity Slat Roof
EC Declaration of Conformity Slat roof EC Declaration of Conformity Slat roof The product: WAREMA slat roof Type: Lamaxa L60 Lamaxa L70 Purpose: External textile sun shading system Meets the provisions of Machinery Directive 2006/42/EC in the case of motor drives. -
Page 24: Ec Declaration Of Conformity Integrated Awning With Easyzip Guidance
EC Declaration of Conformity Integrated awning with easyZIP guidance The product type: WAREMA awnings (window/facade outside) Product line: Front-mounted awnings Awning window systems Integrated awning with easyZIP guidance Purpose: External textile sun shading system Meets the provisions of Machinery Directive 2006/42/EC in the case of motor drives.
Need help?
Do you have a question about the Lamaxa L60 and is the answer not in the manual?
Questions and answers