Biostar Hi-Fi A85W Setup Manual page 19

CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
On-Board Buttons
There are 2 on-board buttons.
BIOS POST Code/CPU Temperature Indicator
This indicator will show POST code while booting. After the booting sequence,
it will show current CPU temperature. Please refer to Chapter 7.4 for all the
BIOS POST codes.
Hi-Fi A85W/Hi-Fi A75W
Pin Assignment
1 IrDA serial input
2 Ground
3 Ground
4 Key
5 IrDA serial output
6 IR Power
SW_PWR1:
This is an on-board
Power Switch button.
SW_RST1:
This is an on-board
Reset button.
17