Biostar Hi-Fi A85W Setup Manual page 18

Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
16
1 3
Pin 1-2 Close:
Normal Operation (default).
1 3
Pin 2-3 Close:
Clear CMOS data.
Pin Assignment
1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator
10 NC