Table of Contents
Advertisement
indicated by the light source. After the service time is reached, please
change the light source in time before use.
6. Installation requirement
1. The product shall be free from corrosive vapors and gases in the
operating environment and shall not contain inflammable and
explosive articles.
2. Keep the distance between the light outlet direction and the subject
at least more than 1 meters.
3.The direction of the light is an optical lens. No external force can hit
the glass in the process of operation. If the lens is damaged, it can
only be used after the professional technician replacing the lens of the
same specifications .
4. When the outer cover of the power cord is damaged, it must be
replaced with a new power cord of the same specification by relevant
professional personnel before use.
5.When the product is hung and installed, the load bearing of the
hanging device shall be at least 3 times greater than the weight of the
product, and the safety rope shall be fastened on the auxiliary
hanging device of the lamp, and the load bearing of the safety rope
shall be more than 3 times greater than the weight of the product.
6. The lens and light source of this product must be fully used
together. When any part is damaged, it shall be replaced by relevant
professional personnel before it can be used again.
7. In the operating environment, it must be determined that the
current voltage provided is within the range required by this
specification well grounded.
12
Advertisement
Table of Contents
