Summary of Contents for ACEK9 H-RBM
- Page 1 Pager Install Manual H-RBM New Systems with protective relay module (instructions for older units on following pages)
-
Page 2: Installation Considerations
Step 9 Test the Pager System with the Heat Alarm. Run a system Test to verify transmission (See manual of your AceK9.Com product) Step 10 Secure the Pager Transmitter in a dry location. - Page 4 Pager Install Manual H-RBM With AceK9 Alarms With Options cables Intelabox's without X Serial Numbers and AceK9 alarms built after 2011 AceK9 alarm Built Prior to 2011 will not function properly with this pager.
- Page 5 Installation Considerations. 1. The Pager transmits radio signals and should be mounted at least six inches from other electronic devices. 2. Mount in a dry location. Step 1 Install Pager Antenna, Follow instructions included with antenna. Step 2 Plug Antenna into the Pager Transmitter socket marked "ANTENNA". Socket marked radio is not used.
- Page 6 After programming is completed, Test the Pager System with the Heat Alarm. Run a system test to verify transmission (See manual of your AceK9.Com product) Step 10 Secure the Pager Transmitter in a dry location. Contact AceK9.com if you are installing a pager on a system built before 2011...
- Page 7 Blank Page...
- Page 8 Programming Replacement Receivers All Rights Reserved, AceK9.com...