Sony TRINITRON KV-HA21P50 Service Manual page 10

KV-HA21P50
RM-969
E
Connecting optional components
Connecting to the video input terminal ( t )
TV front panel
(MONO)
L
TV rear panel
R L(MONO)
Note
• Do not connect video equipment to
the same time; otherwise the picture will not be displayed properly on the screen.
Connecting to the monitor output terminal (T)
TV rear panel
R L(MONO)
F
Troubleshooting
If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.
Symptom
• Check the antenna cable and connection on the TV, VCR and on the wall.
Snowy picture,
• Preset the channel manually again. (See J)
noisy sound
• Check the antenna setup. Contact a Sony dealer for advice.
• Check the power cord, antenna and the VCR connections.
No picture, no sound
• Press ?/1 (power) or ! (main power) to turn on the TV.
• Press 2 + to increase the volume level.
Good picture, no sound
• Press % to cancel the muting.
• Do not use a hair dryer or other equipment near the TV.
Dotted lines or stripes
• Check the antenna setup. Contact a Sony dealer for advice.
• Use the fine tuning ("FINE") function. (See J)
Double images or
• Turn off or disconnect the booster if it is in use.
"ghosts"
• Check the antenna setup. Contact a Sony dealer for advice.
• Select the appropriate color system. (See J)
No color
• Adjust the color level. (See K)
• Check the antenna setup. Contact a Sony dealer for advice.
• Keep external speakers or other electrical equipment away from the TV.
Abnormal color
Press ! (main power) to turn off the TV for about 15 minutes, then turn it
patches
on again to demagnetize the TV.
• Count the number of times the 1 (standby) indicator flashes. Press !
The 1 (standby)
(main power) to turn off your TV. Contact your nearest Sony service
indicator on your TV
center.
flashes red several
times after every
three seconds.
• Changes in room temperature sometimes make the TV cabinet expand or
TV cabinet creaks.
contract, making a noise. This does not indicate a malfunction.
• The TV's demagnetizing function is working. This does not indicate a
A "boom" sound is
malfunction.
heard when the TV is
turned on.
R
Audio/Video cable
(not supplied) Camcorder
Video game
equipment
Antenna cable
(not supplied)
Audio/Video cable
(not supplied)
VCR
t (video input) at the front and the rear of your TV at
Audio system
Audio/Video cable
(not supplied)
VCR
Solutions
H
Remote control
0
1
qa 1
qs
2
2
qd
1 2 3 3
4 6
5
4
qf
7 8 9
5
-
0
JUMP 6
3
SOUND 2 PROGR
4 7
MODE
qg
9
5
qh
0
qj 6
qa
qk 7
qd
SPACE
SOUND
8
qf
ql
9 Timer operations
TV
qg
ql
qh
Teletext operations (green label)
I Setting the timers
You can turn on and off your TV by using the
Setting the Wake Up timer
1
\/1
1 3
2
4 5 6
7 8 9
-
0
JUMP
SOUND 2
PROGR
MODE
SPACE
SOUND
2
TV
3
Setting the Sleep timer
Notes
• You can also cancel the Wake Up and Sleep timers by turning off the TV's main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using
the Wake Up timer, the TV automatically goes into standby mode.
– 8 –
Button Function See
–
?/1 Turn off temporarily or
turn on the TV.
–
a Display the TV program.
–
JUMP Jump to previous
program number.
–
PROGR +/– Select program number.
–
2 +/– Adjust volume.
–
SELECT Select the desired item.
PIC MODE Select picture mode. K
+/– Adjust items. –
Display on-screen –
information.
–
% Mute the sound.
–
t Select TV or video input.
–
0 – 9, ÷
Input numbers.
qj Set TV to turn on
I
automatically.
qk Set TV to turn off
I
automatically.
SOUND MODE Select sound mode. K
K
SPACE SOUND Select space sound mode.
A/B Not function for your TV. –
8
x (red, green,
yellow, blue)
0
qs
Not function for your TV. –
qd
qh
qj
qk
and buttons respectively.
Press until the desired period of time appears
on the screen.
WAKE UP TIMER:0H10M
(After 10 minutes)
WAKE UP TIMER:OFF WAKE UP TIMER:12H00M
(No Wake Up timer) (After 12 hours)
The Wake Up timer starts immediately after you
have set it.
Select the program number or video input you
want to wake up to.
Press \/1, or set the Sleep timer if you want
the TV to turn off automatically.
The indicator on the TV lights up orange when
the TV goes into standby mode.
Press until the desired period of time appears
on the screen.
SLEEP TIMER:30M SLEEP TIMER:60M
(After 30 minutes) (After 60 minutes)
SLEEP TIMER:OFF SLEEP TIMER:90M
(No Sleep timer) (After 90 minutes)
The Sleep timer starts immediately after you have
set it.