Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Flexboat Manuals
  4. Boat
  5. FLEX 450
  6. Assembly instructions manual

Flexboat FLEX 450 Assembly Instructions Manual

Bimini top assembly
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Bimini Top assembly instructions

Advertisement

loading

Related Manuals for Flexboat FLEX 450

Summary of Contents for Flexboat FLEX 450

  • Page 1 Bimini Top assembly instructions...
  • Page 2 INTRODUCTION Identifying the components of the fiberglass cover...
  • Page 3 BIMINI TOP ASSEMBLY STEP 1 Insert your finger in the access cavity and release the pressure latch by raising the end of the cover. NOTE: The pressure latches are located in each side, in the front end of the Bimini Top cover, one to Port and the other to Starboard.
  • Page 4 After releasing both pressure latches, completely raise the cover. STEP2 With the cover fully raised, open both "Mini Covers" by releasing the Velcro straps.
  • Page 5 STEP3 Retrieve the Bimini Top from its receptacle, raise it and fully extend its telescopic legs. Then rest the Bimini Top on the bow of the boat.
  • Page 6 STEP4 Close the compartment with both "Mini Covers" open. *NOTE: Make sure that the "Mini Cover" stays behind the leg and inside the compartment.
  • Page 7 STEP5 Unroll the straps from the Bimini Top and attach the bow straps first, using the Bow Attachment Rings. Then attach the Stern straps, using the Stern Attachment Rings. The Bimini Top will be fully opened. Adjust if needed.

  • Page 8: Storing The Bimini Top

    STORING THE BIMINI TOP STEP1 Release the stern straps, then release the bow straps. STEP 2 Close the Bimini Top and roll the straps around it. Lean and rest the Bimini Top on the bow of the boat. STEP 3 Release the pressure latches of the compartment cover and fully raise it.