Manual Tuning (|<< / >>|); Change Bands (Band); Track Search; 13. Mute - Boss Audio Systems 625UAB User Manual

OPERATION
10.FF( ) &11.FB(
In the radio mode:
Long press the or
mode, briefly press the
Short press the
for the strong signal radio station within the cuttent band. The auto searching will stop until find a
station.
In the USB mode:
Briefly press the
Press and hold the
12.BND/AMS
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1、F2、F3 for FM band,
and A1, A2 for AM band will be shown on the LCD display.
Press the BND/AMS
control to scan each preset station in each band.
During USB playback, press and hold the BND/AMS button to enter track search mode, the
"TRK0000" will appear on the display. Rotate VOL knob to select the "first number". Then press the
button to move the "first number" to the left and enter the next number. Finally press the SEL button to
confirm and play the selected track. If no any operation in 5 seconds,it will play the current track.

13. MUTE

14. USB PORT

15. AUX IN JACK

16.
If you want to reset the unit, press the
the head unit.
17. RESET
To reset all parameters to factory default values. Press the
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET
hole.
)
button for more than 2 seconds, the unit will switch to manual tuning
or button to search the next or previous frequency step by step.
or button, the automatic search will start, it will search upward or downward
or button to play the the next or previou track.
or button to fast forward or fast backward.
When the 6 strongest stations will be stored into
button to detach the front panel, then you can remove it from
button to detach the control panel form
AMS button on the remote
flash on the LCD
check
6