• Drain Valve: Open • Liquid Valve: Open • Tank Select Valve: Antifreeze Tank • Strainer Cap: Off Note: You can also dump antifreeze into tank while unit is running. Do not run pump dry after tank is empty. Spartan Tool LLC SpartanTool.com...
Page 3
Turn the HP water rocker to off. Turn off the unit and drain the water tank fully, using the drain on the front curb side. Open hydrant fill valve to drain any trapped water. Spartan Tool LLC SpartanTool.com...
Page 4
3-way valve to prevent accidentally diluting the antifreeze tank. Turn the HP water rocker to off to safely remove high pressure hose. You may now resume normal jetting with your Elite Soldier. Spartan Tool LLC SpartanTool.com...
Page 5
Note: You can also dump antifreeze into tank while unit is running. Do not run pump dry after tank is empty. ** Try turning the key switch off after hitting the tank drain button for ease of use. Spartan Tool LLC SpartanTool.com...
Page 6
/ garden hose and the clear hose going to the recirculation panel. The unit will automatically shut down when the unit is antifreezed. Turn off the unit and drain the water tank fully using the drain on the front curb side. Open the hydrant fill valve to drain any trapped water. Spartan Tool LLC SpartanTool.com...
Page 7
The unit will now change the remaining valves and start. After 60 seconds water should flow through the pump / HP hose / garden hose and the clear hose going to the recirculation panel. The unit will automatically shut down when the unit is recaptured. You may now resume normal jetting with your Elite Soldier. Spartan Tool LLC SpartanTool.com...
Page 8
CONTACT US OFFICE 1506 West Division Street Mendota, IL 61342 FACTORY 1618 Terminal Road Niles, MI 49120 800.435.3866 SpartanTool.com...
Need help?
Do you have a question about the Elite Soldier and is the answer not in the manual?
Questions and answers