AFG Sleigh Glider Chair Manual

PARTS IDENTIFICATION
♦ ♦ ♦ ♦
A. Back Panel (1 pc)
C. Base (1 pc)
HARDWARE
♦ ♦ ♦ ♦
1. Screw 100mm x width
(2 pcs)
(Hardware Picture Sample)
4. Lock Washer length x width
(4 pcs)
Sleigh Glider Chair
WARNING:
& SAFETY INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP INSTRUCTIONS FOR FUTURE USE.
First remove hardware from box and sort by size. Check to see that all
hardware and wooden pieces are present before assembling.
Follow instructions listed below in the proper sequence as numbered to
assure fast, easy and correct assembly.
WARNING!
1. DO NOT attempt to repair or modify parts with cracks or defects.
Please contact us for immediate replacement.
2. This product is for home use and is not intended for use in
schools, day care centers or other commercial establishments.
3. Must be assembled by a capable adult.
D. Bottom Panel (1 pc)
2. Screw 35mm x width
(11 pcs)
5. Adhesive Felt Pads
length x width (4 pcs)
Model No.: GL7126
Po# :
Serial#:
READ ALL WARNING
B. Arms (2 pcs)
E. Ottoman (1 pc)
3. Barrel Nut length x width (2
pcs)
4. Wrench
(1 pcs)