Page 7
Step 2: Put the Quick Links (H) and the Springs (I) in the hanger’s support. After that, put the chains (J). Take a few minutes to adjust the chain height to your preference. Quick Link P| 6 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 8
Step 4: Attach the diagonal supports (4) to the posts and to the support with 3/8´´ x 7´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 7´´ Bolts Note: If your Swing Set doesn´t include roof, then go to step 8. P| 7 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 9
Step 6: Attach the roof panels (6) to the roof supports with 5/16´´ x 4´´ bolts (E) and to the diagonal supports with 3´´ deck screws (F). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 4´´ Bolts 3´´ Deck Screws P| 8 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 10
Step 8: Attach the seat (8) to the armrest (10) with 5/16´´ x 3 ½´´ bolts (C). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3 ½´´ Bolts P| 9 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 11
3/8´´ X 3 ½´´ Eyebolts 5/16´´ X 3 ½´´ Bolts Step 9: Finally, use quick links (J) to join the chair swing to the chains (L). P| 10 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 12
Option A – Without Swing Roof Option B – With Swing Roof P| 11 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Page 13
This completes the Swing assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 12 BENCH SWING SETS – XL BENCH www.ForeverRedwood.com...
Need help?
Do you have a question about the XL BENCH and is the answer not in the manual?
Questions and answers