Point-To-Point - TP-Link CPE Series Installation Manual

2.
and hotspot applications. Refer to the section
corresponding to your networking needs.

• Point-to-Point

Point-to-Point application is used to build a transparent bridge
below is an example for this application.
Computer
1. Log in to PharOS
2. Go to the Quick Setup page
3. Operation Mode
Select 'Access Point'.
Click 'Next'.
4. LAN Settings: Click 'Next'.
5. Wireless AP Settings
SSID: customize the name for the network as you like.
Security: select 'WPA-PSK/WPA2-PSK'.
PSK Password: create the password for the network as you like.
Distance Setting: enter the distance between the Access Point and
the Client. It is recommended to round the number up to the
nearest integer.
Select the MAXtream option if the Access Point and the Client
both are Pharos outdoor CPEs. (Refer to 'Q4' in 'FAQ' for details abou
MAXtream)
Click 'Next'.
6. Finsh: Click 'Finish'.
11
Access Point
LAN: 192.168.0.254
Client
LAN: 192.168.0.2
IP camera