Related Manuals for panthera PM07-18
Summary of Contents for panthera PM07-18
- Page 1 Panthera engine owner manual PM07-18 Read this manual carefully it contains important information. Property of Panthera® Motorsports inc...
-
Page 2: Introduction
This manual was produced by Panthera° Motorsports inc. and describes operation procedure and service procedure of the PM07-18 engine. We recommend that your read this manual before installing and using your Panthera engine. The manual contains a detailed list of topics in the table of contents. -
Page 3: Table Of Contents
Taking care of the unexpected ........................8 If the engine won’t start ......................... 8 High coolant temperature........................8 Technical information ..........................9 Engine specs ............................9 Fuel and lubricants ..........................9 Torque specifications ..........................10 Altitude/temperature carburetor adjustment ..................11 Property of Panthera® Motorsports inc... -
Page 4: Safety
Keep your vehicle properly maintained and in safe riding condition. To help avoid problem, inspect your vehicle before every ride and perform all recommended maintenance. Property of Panthera® Motorsports inc... -
Page 5: Basic Operation
6. After the engine start, push the choke knob back to OFF position to keep fast idling. 7. If idling is unstable, open the throttle slightly. High air temperature 30°C (86°F): Do not use the choke. Property of Panthera® Motorsports inc... -
Page 6: Flooded Engine
The shift lever automatically returns to the horizontal position when released. PM07-18 engine as six forward gears (1,2,3,4,5 and 6). To upshift, raise the shift lever a full stroke. To downshift, depress the shift lever a full stroke. -
Page 7: Race Maintenance Schedule
Throttle operation Air filter Spark plug Flush after 1 Radiator coolant ride Flush after 1 Transmission oil ride Piston and rings Piston pin and small end bearing Head o-rings Head carbonizing Balancer bearings Clutch plates Property of Panthera® Motorsports inc... -
Page 8: Taking Care Of The Unexpected
Look for a leak, but don’t touch the engine or radiator system. Let everything cool off first. Check for any restriction of air flow through the radiator. If the reserve thank is low or empty, don’t ride without adding coolant. Property of Panthera® Motorsports inc... -
Page 9: Technical Information
1.8 L at disassembly 1.5 L at oil change Transmission oil recommendation Klotz flex drive 30 Cooling system recommendation High quality ethylene glycol antifreeze containing corrosion protection inhibitors specifically recommended for use in aluminium engines. Property of Panthera® Motorsports inc... -
Page 10: Torque Specifications
12 x 1.25 70 (50) Drum shifter set plate bolt 6 x 1.0 10 (7) Balancer nut 16 x 1.0 70 (50) Sprocket bolt 8 x 1.25 27 (20) Kick start lever 8 x 1.25 27 (20) Property of Panthera® Motorsports inc... -
Page 11: Altitude/Temperature Carburetor Adjustment
Wiring diagram Property of Panthera® Motorsports inc... - Page 12 Property of Panthera® Motorsports inc...