Page 1
Washing Machine WMNS714W Installation & User Instructions – Please keep for future reference WMNS814W WMNS814W WMNS714W-WMNS814W-WMNS814B Important – Please read these instructions fully before installing or using These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
Safety Information Before use During use • This appliance is not to be used by children or • The installation of this appliance is best persons with reduced physical, sensory or mental carried out by 2 people. capabilities, Persons with lack of experience and •...
Parts If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Front Back 1. Detergent drawer 7.Packing bolt x 4 2. Top panel 8.Power lead 3. Programme Dial 9.Drain hose 4. Start/Pause button 10.Water inlet 5. Door 6.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Caution: 2 people are required to unpack the washing machine, it is recommended that gloves are worn. a: Carefully remove all packaging materials includ- ing the foam base, dispose of correctly. Note: When opened, water droplets may be vis- ible in the drum etc.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Important: This washing machine MUST only be connected to a cold water supply. a: Connect the water inlet hose, the angled connec- tion attaches to the water inlet on the back of the washing machine.
Installation If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Plug replacement (UK & Ireland only) Should you need to replace the plug; the wires in the power cable are coloured in the following way: Any electrical work that is required to install this Blue –...
Introduction of control panel You can use the liquid level determination plate when you want to wash your laundry with liquid detergent. You can use your liquid detergents in all programs without prewashing. Place the liquid de- tergent aparatus in the second compartment (which is available inside the machine) of the detergent drawer (*) and set the detergent amount.
Page 10
Introduction of control panel Sections Main wash detergent compartment: In this compartment, only materials like detergent (liquid or powder), lime preventer and such can be used. You can find the liquid deter- gent aparatus inside your machine at first installa- tion.
Introduction of control panel Programme selection dial With the programme dial, you can select the On the electronic display, you may view washing programme with which you desire to wash your water temperature, spinning revolution speed of your clothes. You can select programmes by turning the machine, when your machine will finish washing, the programme dial in both directions.
Introduction of control panel Electronic Display Wash level display Digital Display Function display Auxiliary function symbol Start/Pause button Auxiliary function button Delayed start auxiliary function Rpm speed adjustment button Water Temperature Adjustment Button...
Page 13
Introduction of control panel 1- Temperature selection You can select the washing water temperature with the washing water Temperature Spin Speed Delay Timer Auxiliary Start/Pause Function Selection temperature adjustment button. Whenever you select a new Temperature programme, the maximum washing Setting water temperature is shown on the washing water temperature display.
Page 14
Introduction of control panel 3- Delay timer 4- Extra Rinse By using this auxiliary function, you can set the time You can make additional rinse operation when your machine start washing. This time can on your laundry by using this additional vary from an hour to 23 hours.
Introduction of control panel charge operation and cancel the programme. To avoid programme flow from being affected if programme buttons are pressed or programme 5- You can run your machine by selecting a new button is turned when performing washing operation programme.
Page 16
Program Selection Guide Program Washing Prog. Time Deter- /Max load Type of laundry tem- (mins) gent capacity (kg) perature WNS814W com- WNS814W (°c) WNS814B / part. WNS814B / WNS714W WNS714W Cotton 90° 207 / 200 8,0 / 7.0 Very dirty, cotton and flax textiles. (Underwears, linen, tablecloth, towel 90°...
User Instructions If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 slightly dirty clothes, do not pre-wash and put a small amount of detergent in compartment 2 of the detergent drawer. a: Plug in the machine. •...
Error Signals If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Your machine is equipped with systems which will take the necessary precautions and warn you in case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Before cleaning your washing machine. • You can reattach the pump cover in the reverse order that you removed it. a: Unplug your machine from the mains power supply.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Detergent drawer Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time.
Care and Maintenance If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Drum Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. These objects lead to stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturers of the clean- ing agent.
Trouble Shooting If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 All repairs to the machine must be carried out by an authorised repair agent. When a repair is required or you are unable to eliminate the failure with the help of the information below: a: Unplug the machine.
Page 23
Trouble Shooting If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Press the start/pause button.In order to stop the foam,dilute one table-spoon of softener in half liter of water and pour it in the detergent Too much detergent has been used.
Technical Specifications If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271 Model / Item WMNS714W WMNS814W WMNS814W Power supply (220-240) V ~/50Hz (220-240) V ~/50Hz (220-240) V ~/50Hz Max working current 10 amp 10 amp...
Need help?
Do you have a question about the WMNS714W and is the answer not in the manual?
Questions and answers