Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jantex GD847-A
Summary of Contents for Jantex GD847-A
- Page 1 Hand Dryer Instruction Manual Model: GD847-A...
-
Page 2: Table Of Contents
Index Safety Tips ......................3 Product Description ..................3 Pack Contents ....................3 Installation ....................... 4 Operation ......................4 Adjsuting the Automatic Sensor ..............4 Cleaning Care and Maintenance ..............5 Trouble Shooting ....................5 Technical Specifications ................... 5 Electrical Wiring ....................5 Compliance ...................... -
Page 3: Safety Tips
Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities. If the power cord is damaged, it must be replaced by a Jantex agent or a recommended qualified technician in order to avoid a hazard. ... -
Page 4: Installation
2. Hand dryer will stop when hands are removed from under nozzle or time exceeds 1 minute. Adjusting the Automatic Sensor The Jantex Hand Dryer automatically detects when hands are placed under the air nozzle and will then start automatically. The sensitivity (distance from the unit hands need to be to start Hand Dryer) can be adjusted to suit. -
Page 5: Cleaning Care And Maintenance
Switch off the Power at the mains prior to cleaning. Do not use abrasive cleaning agents. These can leave harmful residues. Always wipe dry after cleaning A Jantex agent or qualified technician must carry out repairs if required. Trouble Shooting Problem... -
Page 6: Compliance
JANTEX. Every effort is made to ensure all details are correct at the time of going to press, however, JANTEX reserve the right to change specifications without notice. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Equipment Type Hand Dryer Model GD847-A Legislation C-Tick SAA-150987-EA AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment Standards AS/NZS CISPR 15 IEC 60335-1:2010 AS/NZ 60335-2-23:2012 Producer Name Jantex Producer Address 15 Badgally Road, Campbelltown, NSW 2560 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s). - Page 8 GD847-A_A5_v2_20190621...