Advertisement
Battery Installation and Remove
Install the battery before using the reader for the first time.
1. To access the battery compartment, remove the battery cover
screws and then the battery cover.
2. Insert the battery into the battery compartment with the tape
at the bottom.
3. Attach the battery cover and tighten the screws. Note that the
torque should be 3.5kg.f.
To uninstall the battery,
then the battery cover. Pull the tape on the battery to pull the
battery out.
remove the battery cover screws and
2
Tape
2
3.8V 4000 mAh
Tape
1
1
Advertisement
