Advertisement
CERTIFICATION:
UL WET
2
MOUNT FIXTURE TO CROSSBAR
Position the fixture over the crossbar.
Align the holes on the top and bottom of the
fixture and secure with the supplied screws.
SECURE THE GLASS SHADE
Place the glass shade up to the fixture, align the
3
centre hole of the fixture and secure with the
supplied glass retaining screw.
** This fixture is wet location rated. In order to ensure
that moisture does not enter the outlet box and cause
a short circuit, clear caulking should be used to seal the
space between the fixture mounting bracket and the
wall. Ensure that a space is left at the bottom to allow
for the escape of moisture. It is required that Indoor/
Outdoor Silicon Sealant be used for that purpose**
RESTORE THE ELECTRICITY AND
4
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
CAUTION
2
NO.
20043LEDDMG
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
Advertisement
