Unscrew and remove battery cover on bottom of Lantern
1
Insert 3 AA batteries according to polarity (+/-) as indicated
2
on Lantern battery compartment
Replace and tighten battery cover
3
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED. DO NOT MIX OLD AND
NEW, OR DIFFERENT TYPES OF BATTERIES. DISPOSE OF BATTERIES PROPERLY.
To turn Lantern ON, pull top of Lantern UP
1
from base until unit is fully extended
Magnetic Base
Three magnets mounted in base of Lantern provide easy, hands-free
magnetic adhesion to most ferrous (iron-based) metal surfaces.
Magnetic base is most effective on a flat surface.
Retractable Hanging Hook and Handles
Retractable Hanging Hook on bottom of Lantern base;
1
2
Retractable Handles on side of Lantern. Use to hang Lantern in ideal
locations for maximum light
Installing 3 AA Alkaline Batteries
On/Off Instructions
Adjust height of Lantern to
2
control amount of light emitted
To turn Lantern OFF, push top
3
of Lantern DOWN toward
base until unit is fully closed
2
1