Table of Contents
Advertisement
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
Step
Attach handle and air damper
2
A. Attach handle to bottom bowl using 2 sets of heat resistant washers (J), small
washer (H), large lock washer (L), large wing nut (G).
B. Attach air damper to bottom bowl using 2 sets of small screws (A) and small
wing nuts (E).
H
J
A
Step
Attach legs and wheels
3
A. Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large
washers (I), and large screws (C).
Note: Do not tighten large screws (C) until bottom support grid is attached.
B. Attach bottom support grid to front legs using 2 sets of small washers (H) and
large wing nuts (G).
C. Attach wheels and bottom support grid to wheel legs using 2 sets of wheel nuts
(D).
D. Tighten all 4 large screws (C).
G
H
Step
Attach top lid to bottom bowl
4
A. Attach lid to bottom bowl using 4 sets of small screws (A) and small wing
nuts (E).
B. Insert support clips.
A
E
L
G
E
Step
Insert warming rack
5
A. Slide warming rack into holes in lid and bottom bowl.
Note: Look for corresponding holes on side of lid. Insert short wire ends into lid
holes, one side at a time. Position warming rack legs into slots on grill body sides.
B. Cut zip tie on warming rack.
Step
Insert charcoal grid and cooking grid
6
Place charcoal grid and cooking grid into bottom bowl.
C
I
Step
Completed
D
7
Congratulations your assembly is now complete. Read Operating Instructions
before proceeding.
page no.
2
Advertisement
Table of Contents
