Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SFS Soter
Summary of Contents for SFS Soter
- Page 1 Installation manual Soter fall protection and wire system...
- Page 2 Fall arrest systems are designed to ‘limit the consequences of a fall should it occur’. The Soter HLL system will arrest a users’ fall, only if the required fall clearance has been allowed. Fall clearances must be factored in when a fall arrest system is designed, considering the following factors;...
- Page 3 Please refer to guidelines adjacent, however this should be assessed at the installers discretion on site. For further information on the system please see the complete Soter installation manual on www.sfsintec.biz/se SFS / Installation manual Soter...
- Page 4 Anchor installation is complete ➍ ➎ S2 can onto female boss in base and is ready for Soter plate by hand firstly then to the components to be secured. desired tightness by hand or with the help of a tool.
- Page 5 This needs to be done on all terminations- tensioners and toggle fork ends. SFS / Installation manual Soter...
- Page 6 The nuts on the tensioner can now be tightened against the turnbuckle, locking it in place. SFS / Installation manual Soter...
- Page 7 If the recertification date has lapsed, the system should not be used until a recognised/approved Soter installer has recertified the system as fit for use. Systems are required under EN795 to be recertified annually. SFS / Installation manual Soter...
- Page 8 - T30 - - T30 - - T30 - - T30 - x 300 SFS intec AG / Division Construction / CH- 9435 Heerbrugg / construction@ sfsintec.biz / www.sfsintec.biz Turn ideas into reality. 04/2015 Olivehällsvägen 10 SE-645 42 Strängnäs T +46 (0)-152 71 50 00 se.strangnas@sfsintec.biz...
Need help?
Do you have a question about the Soter and is the answer not in the manual?
Questions and answers