VAPEX TECH VTE600-Combo Product Instructions

Intelligent Li-Po/LiFe Battery Pack Balance Charger
Thank you to choose our VTE600 Combo Charger, it is perfect balance charger for your Li-Po and LiFe 1S to 3S Batteries.
Model No.: VTE600 Combo Balance Charger
Intelligent Li-Po / LiFe Battery Pack Balance Charger (1-3 Series)
VTE600 Combo Balance Charger is special design for Lithium-ion Polymer, Lithium-ion battery or Lithium-Iron-Phosphate
(LiFePO ) Battery, from 1S to 3S Battery Packs. It can not be used for Ni-Cd or Ni-MH rechargeable Batteries, or Primary
4
Batteries.
SAVE THESE INSTRUCTIONS
Characteristics
1、 Special microcomputer controlled, ensure balance precision within 15mV.
2、 Combo charger for both Li-Po and LiFe Batteries.
3、 Build-in Power supply make it more slim and easy to take.
4、 Automatically detects and controls the voltage of each cell independently, ensures a balance voltage between
cells.
5、 Each cell's charge situation can be clearly displayed by one corresponding LED..
6、 Input has protective function of short circuit and opposite connection.
7、 The out-off voltage of charger between 4.20± 0.015V/cell for Li-Po batteries, and.3.65± 0.015V/cell for LiFe
batteries
Method for Charging Rechargeable Batteries
1) Put the Plug in mains socket; the three LEDs will be BLUE when put on Li-Po Position, or GREEN when put on LiFe
position.
2)
Choose the right position of the charger to charge you Li-Po or LiFe Battery. To use Li-Po function to charge LiFe
battery will be over-charge. And to use LiFe function to charge Li-Po battery will be not fully-charge. And One time
it can only charge one piece Battery.
◆ Prohibited charge with Multi-Groups Batteries at the same time!
◆ Prohibited charge LiFe Battery by Li-Po Function, the Battery maybe
too hot to Fire! To charge Li-Po Battery by LiFe Function, the battery will
not be fully charged!
3) Plug 1S~3S Battery pack into the charge port of charger; Ensure that +/- polarity is correct, or
the charger will not work, The charger may be broken.
4) Charging process will start.
When charging 1S battery, 1CELL LED will be RED. 2CELL & 3CELL LEDS will keep BLUE (Li-Po) or GREEN (LiFe).
When charging 2S Battery, 1CELL & 2CELL LEDs will be RED, 3CELL LED will keep BLUE(Li-Po) or GREEN(LiFe).
When charging 3S Battery, 1CELL, 2CELL & 3CELL LEDs will be all RED.
When the RED LEDs turns to RED/BLUE(Li-Po), or RED/GREEN(LiFe), the battery nears 80%~90% charged,
When the RED LEDs turns to BLUE(Li-Po), or GREEN(LiFe), the battery is fully charged,
5) Unplug the Battery from the charger, and unplug the plug from the mains.
Caution
VTE600-Combo
Product Instructions