SUMED Integrity Quick Setup Manual

Quick Set Up Guide
Integrity® comprises the following parts:
• Integrity® pump
• Mains power cord
• Integrity® Mattress Replacement System
• User manual and quick set up guide
Remove the existing mattress from the bed frame then follow
the steps below:
Step 1: Check that there are no sharp objects on the bed frame
surface that will come into contact with the mattress system. The
end with a connector for the power unit is the foot-end.
Step 2: Ensure the mattress is positioned centrally on the bed
ensuring there are no gaps that could cause entrapment. Secure the
mattress to the bed with the securing straps on to the fixed section of
the bed, with a profiling bed the straps must be attached to the
profiling sections.
Step 3: Place the pump in the preferred position on the foot end of
the bed using the hangers or place on floor using hangers as
stabilisers.