RCS -433T Getting Started

RCS - 433T
RCS
Thank you for choosing a RCS product. You are recommended to
read this manual carefully before installing the product.
1 - TRANSMITTER INTRODUCTION
1A - General information
1B - Technical specifications
1C - Main features
2 - CODING
3 - MEMORIZATION
4 - BATTERY ACCESS
5 - TROUBLESHOOTING
1A - General information
The radiocontrol RCS-433T has been designed for the
programmable telephone entry systems, anti-burglar systems
and access control systems.
It has a very high security coding system. (KeeLoq ® Hopping
code).
The code sent by the transmitter changes at each activation,
avoiding any scanning and copying risk. A special algorithm
CONTENTS
allows to keep synchronyzed transmitter and receiver.
The operating frequency is 433,92 MHz.
The receiver RCS-433R type SELWR433, which operates with this
transmitter, has a Wiegand 26 bit format output, suitable with
any type of access control system, equipped with this type of
protocol.
The CR 2016 lithium batteries have a life of about 18 months.
The product fully complies with the European Directives
99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC
Regulations.
1B - Technical specifications
Number of keys:
Supply :
Battery life:
Current consumption :
Operating frequency :
Code combinations :
Modulation :
Rated e.r.p. :
Range in free space:
Operating temperature:
Overall dimensions:
Weight:
1C - Main features
Red
LED
Push-button B
2
2 lithium batteries CR 2016
18 - 24 months
13 mA
433.92 MHz
64
2
AM / ASK
50 - 100 mW
100 - 200 m
-20 ¸ +55 °C
61 x 36 x 16 mm
20 gr.
Push-button A
Battery
door
Key holder
ring