Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Solaire Manuals
  4. Heater
  5. HUBER
  6. User manual

Solaire HÜBER User Manual

Electric radiator
Hide thumbs

Advertisement

Quick Links

Download this manual
HÜBER
Electric Radiator User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the HÜBER and is the answer not in the manual?

Questions and answers

Related Manuals for Solaire HÜBER

Summary of Contents for Solaire HÜBER

  • Page 1 HÜBER Electric Radiator User Guide...

  • Page 2: Table Of Contents

    Contents General Information • (Page 3) Safety • (Page 3) Before you start • (Page 4) Wall Bracket Installation • (Page 5-6) First Start • (Page 7) Useful Information • (Page 8) Further Information • (Page 9) Wiring Diagram • (Page 10) Programming the Controller •...

  • Page 3: General Information

    General Information Maktek HÜBER oil filled electric radiators are manufactured to all the relevant European specifications at our partners modern factory facility in Turkey. They heat up quickly to bring effective and efficient heating to your living areas. HÜBER radiators should be installed alongside our Salus (PR-4) programmable room thermostat, to be fully compliant with ECO Design directives 2018.

  • Page 4: Before You Start

    Before you Start Warning: Do not turn the radiator on when laying flat. This will damage the element and invalidate the Guarantee Important: This is a Class 1 fully earthed product and must be connected to a suitably grounded supply Minimum Clearances: 150mm from the floor to the bottom.

  • Page 5: Wall Bracket Installation

    Wall Bracket Installation SECURE THE WALL BRACKETS, TOP AND BOTTOM, WITH THE SCREWS AND PLUGS SUPPLIED. ALTERNATIVELY USE SUITABLE WALL FIXINGS FOR HOLLOW OR LIGHTWEIGHT WALLS.
  • Page 6 Top and Bottom of the Wall Bracket Supplied Once the brackets are securely fastened to the wall, the radiator can be put into place. Remove the small retaining screw from the top of each wall bracket allowing the spring clip to move up and down The Radiator is heavy.

  • Page 7: First Start

    First Start To turn the radiator on, push the switch to the “I” icon. To turn the radiator off push the switch to the “0” icon. When the Radiator is heating, the Red light on the switch will be illuminated The numbers on the thermostat wheel are a guide to the following surface temperatures.

  • Page 8: Useful Information

    Useful Information Radiator not getting warm POWER SUPPLY: Make sure the power supply to the Radiator and Pr-4 reviver unit is good. If there is no power to the radiator, manually override the receiver unit. (See page 11-12) THERMOSTAT WHEEL: Make sure the thermostat wheel is set to position “5”...
  • Page 9 Further info To be compliant with Erp2018/Lot20 this radiator must be used in conjunction with our Pr– 4 programmer. The programmer allows the user to program a 24 hour 7 day heating schedule. Ideally the radiator should be positioned under a window and away from curtains. The room’s Insulation is essential to ensure the radiator works efficiently.
  • Page 10 Pr-4 Wiring Instruction The wiring diagram below explains how to wire the Pr-4 receiver unit. The image above shows the rear if the pr-4 re- ceiver unit. The cable on the left if the load to the heater. The cable on the right is the 240v supply. Terminal Live to heater Link wire to 3 (not supplied)

  • Page 13: Guarantee

    The guarantee does not cover any refitting costs or other costs occurred as a result of the product’s failure. Your statutory rights are not affected by this guarantee. Please retain this document for future reference. SolAire Heating Products Big Shed New Row Eppleby...