Remove & Close The Lens Cover
Remove the lens cover before using
Close the lens cover when unit not in use
REMOVE
CLOSE
LENS COVER
LENS COVER
Placing Your Projector
Your projector can be installed in four different configurations ( see picture
below):
Front Table:
Select this location with the projector placed
near the floor in front of the screen. This is the
most common way to position the projector
for quick setup and portability.
FRONT TABLE
Front Ceiling:
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen.
NOTE: A projector mount is required to install
the projector in a ceiling.
FRONT CEILING
Rear Table:
Select this location with the projector placed
near the floor behind the screen.
NOTE: A special rear projection screen
is required.
REAR TABLE
Rear Ceiling:
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
NOTE:
A projector mount is required to install the
REAR
CEILING
projector in a ceiling.
A special rear projection screen is required.
4